Jamaica eSIM Data Plan

An eSIM, or embedded SIM, is a digital SIM that allows you to connect to a mobile network without the need for a physical SIM card. eSIMs are embedded directly into your device, so you don't have to worry about carrying around a separate SIM card.

To use an eSIM, you'll need a device that is compatible with eSIM technology. This can include smartphones, tablets, or other connected devices. Once you have a compatible device, you'll need to activate your eSIM by downloading a profile from your mobile network operator. This process is usually done via a QR code or by inputting a series of numbers provided by your operator.

Once your eSIM is activated, you can use it to connect to a mobile network just like you would with a physical SIM card. You can make calls, send text messages, and use data just as you normally would. One of the main benefits of an eSIM is that it allows you to easily switch between mobile networks or plans without the need to physically swap SIM cards. This can be especially convenient if you travel frequently or if you use multiple devices.

How to Activate an eSIM 

Activation is simple. Follow the steps below: 

1. On the device where you want to install the eSIM data plan, open the Camera app. 

2. Point the camera at the QR Code. Tap on the notification that appears, which should say Cellular Plan Detected - Tap to preview this cellular plan.

3. On the following screen, follow the prompts to install the new Data Plan. Usually the default options are okay to accept.

4. Once the new Data Plan has been added, make sure that Data Roaming is set to ON in your phone's Settings, under Cellular Data > Your new eSIM plan. Note that your eSIM plan may be called "Secondary" or "Personal."

Connecting to the Internet

After successfully activating your eSIM, your device will begin searching for a signal immediately. In most cases, a data connection will be established immediately, and you will see 4G/LTE/5G in the signal status. This means you are connected and ready to go! 

In rare cases, it may take up to 15 minutes for a data connection to be established. Please be patient, as there are many data carriers and environmental factors that can affect the activation time.

How to use the Manual Activation Code

iOS / iPhone

1. Open Settings
2. Go to Cellular
3. Under Cellular Plans, tap Add Data Plan. Your phone's camera will open.
4. Tap Enter Details Manually near the bottom of the camera screen.
5. Enter the SM-DP+ Address shown in your account.
6. Enter the Activation Code shown in your account.

Android 13 / Google Pixel

1. Open Settings
2. Go to Network and Internet
3. Look for SIMs, and tap the + icon
4. Tap Download a SIM instead? near the bottom of the screen
5. On the message that appears, tap Yes, then tap Next. The phone's camera will open.
6. Tap Need help? at the bottom of the screen
7. On the ‘Help adding a network’ screen, underneath ‘Having trouble scanning your QR code’, you can tap Enter it manually.
8. Now enter the Manual Activation Code
9. Follow the steps on the screen to confirm the new data plan.

All eSIM cards are delivered instantly via email.